Centos 6.4 KVM安装详细教程

类别: 常用技术文章来源：www.nanyuetong.com

摘要：第一步：修改网卡配置文件并重启网络服务： cd /etc/sysconfig/network-scripts/ [iyunv@KVM3 network-scripts]# cat ifcfg-br0 DEVICE="br0" ONBOOT="yes" TYPE=Bridge BOOTPROTO=static #HWADDR=F0:1F:AF:DA:7A:55 #IPADDR=0.0.0.0 #NETMASK=255.255.255.0 [iyunv@KVM3 network-scripts]# cat ifcfg-br1 ...

第一步：修改网卡配置文件并重启网络服务：
cd /etc/sysconfig/network-scripts/
[iyunv@KVM3 network-scripts]# cat ifcfg-br0
DEVICE="br0"
ONBOOT="yes"
TYPE=Bridge
BOOTPROTO=static
#HWADDR=F0:1F:AF:DA:7A:55
#IPADDR=0.0.0.0
#NETMASK=255.255.255.0
[iyunv@KVM3 network-scripts]# cat ifcfg-br1
DEVICE="br1"
ONBOOT="yes"
TYPE=Bridge
BOOTPROTO=static
#HWADDR=F0:1F:AF:DA:7A:56
IPADDR=192.168.20.248
NETMASK=255.255.255.0

[iyunv@KVM3 network-scripts]# cat ifcfg-eth0
DEVICE=eth0
ONBOOT=yes
TYPE=Ethernet
BRIDGE=br0
[iyunv@KVM3 network-scripts]# cat ifcfg-eth1
DEVICE=eth1
ONBOOT=yes
TYPE=Ethernet
BRIDGE=br1
[iyunv@KVM3 network-scripts]# /etc/init.d/network  restart
查看网卡配置

[iyunv@KVM3 network-scripts]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
   valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether f0:1f:af:da:7a:55 brd ff:ff:ff:ff:ff:ff
inet6 fe80::f21f:afff:feda:7a55/64 scope link
   valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether f0:1f:af:da:7a:56 brd ff:ff:ff:ff:ff:ff
inet6 fe80::f21f:afff:feda:7a56/64 scope link
   valid_lft forever preferred_lft forever
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether f0:1f:af:da:7a:55 brd ff:ff:ff:ff:ff:ff
inet6 fe80::f21f:afff:feda:7a55/64 scope link
   valid_lft forever preferred_lft forever
5: br1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
link/ether f0:1f:af:da:7a:56 brd ff:ff:ff:ff:ff:ff
inet 192.168.20.248/24 brd 192.168.20.255 scope global br1
inet6 fe80::f21f:afff:feda:7a56/64 scope link
   valid_lft forever preferred_lft forever
第二步：配置Centos6官方的yum源，
[iyunv@KVM3 yum.repos.d-bak]# ls
CentOS-Base.repo  CentOS-Debuginfo.repo  CentOS-Media.repo  CentOS-Vault.repo
[iyunv@KVM3 yum.repos.d-bak]# cat CentOS-Base.repo
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#

[base]
name=CentOS-$releasever - Base
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6

#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
[iyunv@KVM3 yum.repos.d-bak]# cat CentOS-Debuginfo.repo
# CentOS-Debug.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client.  You should use this for CentOS updates
# unless you are manually picking other mirrors.
#

# All debug packages from all the various CentOS-5 releases
# are merged into a single repo, split by BaseArch
#
# Note: packages in the debuginfo repo are currently not signed
#

[debug]
name=CentOS-6 - Debuginfo
baseurl=http://debuginfo.centos.org/6/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6
enabled=0
[iyunv@KVM3 yum.repos.d-bak]# cat CentOS-Media.repo
# CentOS-Media.repo
#
#  This repo can be used with mounted DVD media, verify the mount point for
#  CentOS-6.  You can use this repo and yum to install items directly off the
#  DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
#  yum --enablerepo=c6-media [command]
#
# or for ONLY the media repo, do this:
#
#  yum --disablerepo=\* --enablerepo=c6-media [command]

[c6-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/
      file:///media/cdrom/
      file:///media/cdrecorder/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
[iyunv@KVM3 yum.repos.d-bak]# cat CentOS-Vault.repo
# CentOS-Vault.repo
#
# CentOS Vault holds packages from previous releases within the same CentOS Version
# these are packages obsoleted by the current release and should usually not
# be used in production
#-----------------

[C6.0-base]
name=CentOS-6.0 - Base
baseurl=http://vault.centos.org/6.0/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-updates]
name=CentOS-6.0 - Updates
baseurl=http://vault.centos.org/6.0/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-extras]
name=CentOS-6.0 - Extras
baseurl=http://vault.centos.org/6.0/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-contrib]
name=CentOS-6.0 - Contrib
baseurl=http://vault.centos.org/6.0/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.0-centosplus]
name=CentOS-6.0 - CentOSPlus
baseurl=http://vault.centos.org/6.0/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------

[C6.1-base]
name=CentOS-6.1 - Base
baseurl=http://vault.centos.org/6.1/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.1-updates]
name=CentOS-6.1 - Updates
baseurl=http://vault.centos.org/6.1/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.1-extras]
name=CentOS-6.1 - Extras
baseurl=http://vault.centos.org/6.1/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.1-contrib]
name=CentOS-6.1 - Contrib
baseurl=http://vault.centos.org/6.1/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.1-centosplus]
name=CentOS-6.1 - CentOSPlus
baseurl=http://vault.centos.org/6.1/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------

[C6.2-base]
name=CentOS-6.2 - Base
baseurl=http://vault.centos.org/6.2/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.2-updates]
name=CentOS-6.2 - Updates
baseurl=http://vault.centos.org/6.2/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.2-extras]
name=CentOS-6.2 - Extras
baseurl=http://vault.centos.org/6.2/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.2-contrib]
name=CentOS-6.2 - Contrib
baseurl=http://vault.centos.org/6.2/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.2-centosplus]
name=CentOS-6.2 - CentOSPlus
baseurl=http://vault.centos.org/6.2/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------

[C6.3-base]
name=CentOS-6.3 - Base
baseurl=http://vault.centos.org/6.3/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.3-updates]
name=CentOS-6.3 - Updates
baseurl=http://vault.centos.org/6.3/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.3-extras]
name=CentOS-6.3 - Extras
baseurl=http://vault.centos.org/6.3/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.3-contrib]
name=CentOS-6.3 - Contrib
baseurl=http://vault.centos.org/6.3/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0

[C6.3-centosplus]
name=CentOS-6.3 - CentOSPlus
baseurl=http://vault.centos.org/6.3/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[iyunv@KVM3 yum.repos.d-bak]# yum clean all
第三步：安装所需要的虚拟化包
[iyunv@KVM3 network-scripts]# yum grouplist
[iyunv@KVM3 network-scripts]# yum groupinstall -y 'Virtualization' 'Virtualization Client' 'Virtualization Platform' 'Virtualization Tools'
第四步：ntsysv 管理开机自启动服务
第五步：关闭selinux服务
[iyunv@KVM3 yum.repos.d-bak]# cat /etc/selinux/config
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#    enforcing - SELinux security policy is enforced.
#    permissive - SELinux prints warnings instead of enforcing.
#

【收藏本页】【返回顶部】【关闭窗口】

Centos 6.4 KVM安装详细教程

Links友情链接